The Simucube Co-Pedal is a versatile passive sim racing pedal that can be used as either an accelerator or a clutch. The pedal was developed as a complement to the Simucube ActivePedal Pro and Ultimate. It comes pre-assembled as an accelerator pedal, but with the included parts, it can easily be converted into a clutch pedal.

Simucube uses its patented mechanical Arc technology. By swapping out the Arc profile and the spring, not only does the resistance change, but so does the pedal’s entire force curve. When used as an accelerator pedal, it offers a smooth, progressive motion; in clutch mode, it provides a clearly discernible engagement point.

A precise Hall-effect angle sensor tracks the position throughout the entire pedal stroke. Because this sensor operates without physical contact, there is no mechanical wear or dead zones in the measurement. This ensures consistent and accurate tracking of every pedal movement.

The pedal stroke can be set to 30, 50, or 70 mm. The preload, rest angle, length of the pedal arm, and the height and angle of the pedal plate are also adjustable. Thanks to the rigid frame, the structure remains stable, even when using the heavier clutch spring.

Key Features

• Passive pedal, configurable as an accelerator or clutch
• Developed as a complement to the ActivePedal Pro and Ultimate
• Patented mechanical Arc technology
• Takes about one minute to set up
• Contactless Hall-effect angle sensor with no dead zones
• Adjustable pedal stroke of 30, 50, or 70 mm
• Adjustable preload, pedal angle, and pedal plate height
• Maximum force of approximately 11 kg when used as an accelerator pedal
• Maximum force of approximately 25 kg as a coupling
• Dimensions: 242 × 83 × 308 mm
• Weight: 1.6 kg
• Three-year warranty

*Important to know

The Simucube Co-Pedal is a passive expansion pedal and cannot be connected directly to a PC. Use the included RJ25 cable to connect the pedal to a Simucube ActivePedal Pro or ActivePedal Ultimate.

The pedal is delivered pre-assembled as an accelerator pedal. A clutch spring, clutch plate, and matching pedal plate are included, so you can also configure it as a clutch. For a setup with both a separate gas pedal and a separate clutch pedal, two Co-Pedals are required.